Entry Clone Source: TKC
|
Entry Clone Accession: n/a
|
SGC Construct ID: PIM1A-c001
|
GenBank GI number: gi|4505811
|
Entry clone accession/ sequence: The expressed protein has the sequence from gi 33304198 which differs from gi 4505811 by a single change R250G (bold in the sequence below)
|
Expressed protein sequence:
mhhhhhhssgvdlgtenlyfqsMLLSKIN
SLAHLRAAPCNDLHATKLAPGKEKEPLES
QYQVGPLLGSGGFGSVYSGIRVSDNLPVA
IKHVEKDRISDWGELPNGTRVPMEVVLLK
KVSSGFSGVIRLLDWFERPDSFVLILERP
EPVQDLFDFITERGALQEELARSFFWQVL
EAVRHCHNCGVLHRDIKDENILIDLNRGE
LKLIDFGSGALLKDTVYTDFDGTRVYSPP
EWIRYHRYHGRSAAVWSLGILLYDMVCGD
IPFEHDEEIIGGQVFFRQRVSSECQHLIR
WCLALRPSDRPTFEEIQNHPWMQDVLLPQ
ETAEIHLHSLSPGPS
|
Vector: pLIC- SGC1. Details [PDF]; Sequence [FASTA] or [GenBank]
|
Tags and additions: mhhhhhhssgvdlgtenlyfq*s(m). N-terminal his6 tag, TEV-protease cleavable (*).
|
Host: BL21(DE3)
|
Growth medium, induction protocol: 5 ml overnight cultures in LB, 100 µg/ml ampicillin were grown at 37°C and 0.5 ml used to inoculate 1 litre of LB medium containing 100 µg/ml ampicillin. Cultures were grown at 37°C until they reached an OD600 of 1.2 and then cooled to 18°C over 20 minutes. Expression was then induced overnight using 0.5 mM IPTG. The cells were collected by centrifugation, transferred to 50 ml tubes, resuspended in 30 ml binding buffer, and frozen. Binding buffer: 50 mM HEPES pH 7.5, 500 mM NaCl, 5% Glycerol.
|
Extraction buffer, extraction method: The frozen cells were thawed on ice and 0.5mM TCEP and 1 mM PMSF added. Cells were lysed using a high pressure cell disruptor. The lysate was centrifuged at 17,000 RPM for 30 minutes. Supernatant was collected and binding buffer was added to 50 ml.
|
Column 1: Ion exchange - Nucleic acid removal. DEAE cellulose (DE52, Whatmann), 10 gr of resin in 2.5 x 20 cm column. The resin was hydrated in 2.5M NaCl, then washed with 20 ml binding buffer prior to loading the sample.
|
Buffers: Binding buffer
|
Procedure: Supernatant was applied at gravity flow, followed by a wash with 40 ml binding buffer. The column flow-through was collected.
|
Column 2: Ni-affinity. Ni-sepharose (Amersham), 5 ml of 50% slurry in 1.5 x 10 cm column, equilibrated with binding buffer.
|
Buffers: Binding buffer: 50 mM HEPES pH 7.5, 500 mM NaCl, 5% Glycerol. Wash buffer: 50 mM HEPES pH 7.5, 500 mM NaCl, 20 mM Imidazole, 5% Glycerol. Elution buffer: 50 mM HEPES pH 7.5, 500 mM NaCl, 50 to 250 mM Imidazole, 5% Glycerol.
|
Procedure: The flowthrough from column 1 was loaded by gravity flow on the Ni-sepharose column. The column was then washed with 50 ml wash buffer under gravity flow. The protein was eluted by applying 5-ml portions of elution buffer with increasing concentration of imidazole (50 mM, 100 mM, 250 mM); fractions were collected until essentially all protein was eluted. After elution DTT was added to a final concentration of 10 mM.
|
Enzymatic treatment: Dephosphorylation (a GST fusion with the lambda phosphatase) and TEV protease cleavage.
Samples containing Pim1 were pooled and treated with lambda phosphatase and TEV protease overnight at 4°C. Protein was kept in elution buffer with the addition of 10 mM DTT and 0.05 mM MnCl2 (higher MnCl2 concentrations caused precipitation).
|
Column 3: HiLoad 16/60 Superdex 200 gel filtration
|
Buffer: 50 mM Hepes pH 7.5, 250 mM NaCl
|
Procedure: Dephosphorylated Pim1 protein was concentrated to 3 ml and ran on a S200 gel filtration column collecting 1.8 ml fractions. 10 mM DTT was added to the eluted protein for overnight storage
|
Column 4: Ion exchange Mono Q column.
|
Buffers: A : 50 mM Hepes pH 7.5. B : 50 mM Hepes pH 7.5, 1000 mM NaCl.
|
Procedure: Pim1 was applied to MonoQ in buffer A and eluted from the column by a linear gradient.
|
Concentration: Pim1 fractions containing dephosphorylated protein were pooled and concentrated in Centricons (10 kDa cut off). Phosphorylation state was confirmed using LC- ESI MS-Tof.
|
Mass spec characterization: The purified protein was homogeneous and had an experimental mass of 35545 Da as expected from its primary structure. Masses were determined by LC-MS, using an Agilent LC/MSD TOF system with reversed-phase HPLC coupled to electrospray ionisation and an orthogonal time-of-flight mass analyser. Proteins were desalted prior to mass spectrometry by rapid elution off a C3 column with a gradient of 5-95% acetonitrile in water with 0.1% formic acid.
|
Crystallization: β-carbolines (CARB10, CARB13) were received from F. Bracher, University of Munich. A 6 ml solution with 1 mg of Pim1 buffered in 50 mM Hepes pH 7.5, 250mM NaCl, 10mM DTT was prepared containing 2 µl of inhibitor (from a 50 mM stock in DMSO) and 20 µl of a 5 mM solution of consensus peptide (ARKRRRHPSGPPTA-amide). This sample was then concentrated to 100 µl to yield a 10 mg/ml crystal sample. Crystals with CARB10 (3CXW) were grown at 4°C in 1.0 µl sitting drops mixing 0.75 µl protein solution with 0.25 µl of a reservoir solution containing 0.14 M sodium malonate, 0.07 M Bis-Tris-Propane pH 7.5, 14 % PEG 3350, 7 % Ethylene Glycol. Crystals with CARB13 (3CY2) were grown at 4°C in 1.0 µl sitting drops mixing 0.8 µl protein solution with 0.2 µl of a reservoir solution containing 0.56 M sodium succinate pH 7.0.
|
Data Collection: Resolution: 2.01Å (3CY2) or 2.1Å (3CXW), X-ray source: rotating anode (Rigaku FR-E SuperBright), single wavelength 1.5Å (3CY2) or Swiss Light Source PX10, single wavelength 0.97912Å (3CXW).
|