KANK2
PDB:4HBD
Revision
Revision Type:created
Revised by:created
Revision Date:created
Entry Clone Accession:NP_001129663.1
Entry Clone Source:MGC CM28-H7 (BC098105)
SGC Clone Accession:KANK2_3; plate JMC051A11
Tag:N-terminal tag: MGSSHHHHHHSSGRENLYFQG
Host:BL21 (DE3) Codon plus RIL (Stratagene)
Construct
Prelude:Sequence:MGSSHHHHHHSSGRENLYFQGSGSNTEEEIRMELSPDLISACLALEKYLDNPNALTERELKVAYTTVLQEWLRLACRSDAHPELVRRHLVTFRAMSARLLDYVVNIADSNGNTALHYSVSHANFPVVQQLLDSGVCKVDKQNRAGYSPIMLTALATLKTQDDIETVLQLFRLGNINAKASQAGQTALMLAVSHGRVDVVKALLACEADVNVQDDDGSTALMCACEHGHKEIAGLLLAVPSCDISLTDRDGSTALMVALDAGQSEIASMLYSRMNIK
Vector:pET28-MHL
Growth
Medium:Antibiotics:Procedure:A 250 mL flask containing LB (Sigma L7658) supplemented with 50 µg/mL kanamycin (BioShop Canada KAN 201) was inoculated from a glycerolstock of the bacteria. The flask was shaken overnight (16 hours) at 250 rpm at 37 °C. Using the Lex system, a 2L bottle (VWR 89000-242) containing1800 mL of TB (Sigma T0918) supplemented with 1.5% glycerol, 50 ug/ mL kanamycin and 600 µl antifoam 204 (Sigma A-8311) was inoculated with50 mL overnight LB culture, and incubated at 37 °C. The temperature of the media was reduced to 15 °C one hour prior to induction and induced at OD 600= 6 with 100 µM isopropyl-thio-β-D-galactopyranoside (BioShop Canada IPT 001). Cultures were aerated overnight (16 hours) at 15 °C, and cell pelletscollected by centrifugation and frozen at -80 °C.
Purification
ProcedureIMAC: Unclarified lysate was mixed with 2-3 mL of Ni-NTA superflow Resin (Qiagen) per 40 mL lysate. The mixture was incubated with mixing for atleast 45 minutes at 4oC. The mixture was then loaded onto an empty comLum (BioRad) and washed with 100 mL wash buffer. Samples were eluted fromthe resin by exposure to 2-3 column volumes (approx. 10-15 mL) of elution buffer. Concentration of eluted protein was estimated by OD280. pTEV wasadded to eluted protein at 1:20 for eluted protein and dialyze against gel filtration buffer overnight to remove His-tag.
Gel filtration chromatography: An XK 26x65 column (GE Healthcare) packed with HighLoad Superdex 75 resin (GE Healthcare) was pre-equilibratedwith gel filtration buffer for 1.5 column volumes using an AKTA explorer (GE Healthcare) at a flow rate of 1.0 mL/min. The dialyzed sample from theIMAC step (approx. 15 mL) was loaded onto the column at 1.5 mL/min, and 2mL fractions were collected into 96-well plates (VWR 40002-012) usingpeak fractionation protocols). Fractions observed by a UV absorption chromatogram to contain the protein were pooled.
Extraction
ProcedureFrozen cell pellet contained in bags (Beckman 369256) obtained from 2L of culture were thawed by soaking in warm water. Each cell pellet wasresuspended in 25-40 mL lysis buffer and homogenized using an Ultra-Turrax T8 homogenizer (IKA Works) at maximal setting for 30-60 seconds perpellet. Cell lysis was accomplished by sonication (Virtis408912, Virsonic) on ice: the sonication protocol was 10 sec pulse at half-maximal frequency(5.0), 10 second rest, for 10 minutes total sonication time per pellet.
Concentration:Purified proteins were concentrated using 15 mL concentrators with a 5,000 molecular weight cut-off (Amicon Ultra-15, UFC900524, Millipore) at 3750rpm, typically resulting in a final concentration around 30 mg/mL.
LigandMassSpec:Crystallization:Crystals of human KANK2 Ankyrin Repeats were grown at 291 K using the hanging drop method by mixing equal volumes of 0.2 M AmmoniumNitrate, and 20% PEG3350 and 20 mg/mL protein. The crystals were soaked in a cryoprotectant consisting of 85 to 90% reservoir solution and 10 to 15%
NMR Spectroscopy:Data Collection:Data Processing:
